Bolt and Chain Cutters
Cut medium steel chain and hard steel bolts, rods, screws, rivets, nails, bars, wire, and rebar. All cutters have an adjustment screw to align cutting edges. For more leverage, choose a cutter with a longer handle. Not for use on wire rope.
Cutters | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Dia. | Replacement Cutting Heads | |||||||||||
Soft Steel | Medium-Hard Steel | Hard Steel | Rebar | Overall Lg. | Jaw Material | Handle Material | Grip Material | Opening Style | Each | Each | ||
5/16" | 5/16" | 3/16" | 3/16" | 14" | Steel | Steel | Rubber | Manual | 0000000 | 0000000 | 0000000 | 0000000 |
3/8" | 3/8" | 1/4" | 1/4" | 18" | Steel | Steel | Rubber | Manual | 0000000 | 000000 | 0000000 | 000000 |
7/16" | 7/16" | 5/16" | 5/16" | 24" | Steel | Steel | Rubber | Manual | 0000000 | 000000 | 0000000 | 000000 |
1/2" | 1/2" | 3/8" | 3/8" | 30" | Steel | Steel | Rubber | Manual | 0000000 | 000000 | 0000000 | 000000 |
9/16" | 9/16" | 7/16" | 7/16" | 36" | Steel | Steel | Rubber | Manual | 0000000 | 000000 | 0000000 | 000000 |
11/16" | 11/16" | 1/2" | __ | 42" | Steel | Steel | Rubber | Manual | 000000 | 000000 | 000000 | 000000 |
Bolt, Hard Chain, and Padlock Cutters
With a short-nosed jaw, these cutters force the material being cut deeper into the jaw for maximum leverage. The short jaw also allows you to cut one side of a chain link or padlock hasp without hitting the other side. All cutters have adjustment screws to align cutting edges. For more leverage, choose a cutter with a longer handle. Not for use on wire rope.
Cutters | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Dia. | Replacement Cutting Heads | ||||||||||||
Soft Steel | Medium-Hard Steel | Hard Steel | Rebar | Hard Chain | Overall Lg. | Jaw Material | Handle Material | Grip Material | Opening Style | Each | Each | ||
7/16" | 5/16" | 5/16" | 5/16" | 5/16" | 24" | Steel | Steel | Rubber | Manual | 000000 | 0000000 | 0000000 | 000000 |
5/8" | 7/16" | 7/16" | 7/16" | 7/16" | 36" | Steel | Steel | Rubber | Manual | 000000 | 000000 | 0000000 | 000000 |
3/4" | 1/2" | 1/2" | 1/2" | 1/2" | 42" | Steel | Steel | Rubber | Manual | 000000 | 000000 | 0000000 | 000000 |
Electrical-Insulating Bolt and Chain Cutters
Insulated handles protect against shock from accidental contact with live electrical circuits. These cutters are tested to 1,000 volts to meet IEC 60900 and ASTM F1505. Use to cut medium steel chain and hard steel bolts, rods, screws, rivets, nails, bars, and wire. Cutters have an adjustment screw to align cutting edges. Not for use on wire rope.
Flush-Cut Bolt and Chain Cutters
Blades are flat on one side for close-to-the-surface cuts. All cutters have an adjustment screw to align cutting edges. For more leverage, choose a cutter with a longer handle. Not for use on wire rope.
Bench-Mount Bolt, Hard Chain, and Padlock Cutters
Make repeated cuts in hard materials with this cutter. It mounts for stability and provides extra leverage. It has a short-nosed jaw that forces the material being cut deep into the jaw and also allows you to cut one side of a chain link or padlock hasp without hitting the other side. Align cutting edges with the adjustment screw. Not for use on wire rope.
Air-Powered Bolt and Chain Cutters
Slice through bolts and chain with low effort. A spring opens the jaws for quick cuts. Not for use on wire rope.
Cutters | ||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Dia. | Overall | Replacement Cutting Heads | ||||||||||||||||
Soft Steel | Medium-Hard Steel | Hard Steel | Rebar | Hard Chain | Lg. | Ht. | Jaw Material | Grip Material | Air Pressure | For Air Hose ID | Air Hose Included | Thread Type | Pipe Size | Gender | Each | Each | ||
3/8" | 3/8" | 5/16" | 5/16" | 5/16" | 15" | 7 1/4" | Steel | Rubber | 80-120psi | 3/8" | No | NPT | 3/8 | Female | 0000000 | 000000000 | 0000000 | 0000000 |
1/2" | 1/2" | 3/8" | 3/8" | 3/8" | 17 1/2" | 10" | Steel | Rubber | 90-130psi | 3/8" | No | NPT | 3/8 | Female | 0000000 | 00000000 | 0000000 | 000000 |
Compact Bolt Cutters
Make one-handed cuts with these small cutters. Jaws are riveted onto the handles and are not replaceable. Not for use on wire rope.
Spring-assisted jaw allows you to make quick cuts.
For Max. Dia. | |||||||||
---|---|---|---|---|---|---|---|---|---|
Soft Steel | Medium-Hard Steel | Hard Steel | Overall Lg. | Jaw Material | Handle Material | Grip Material | Opening Style | Each | |
3/16" | __ | __ | 8" | Steel | Steel | Plastic | Spring Assisted | 0000000 | 000000 |
3/16" | 1/16" | __ | 8" | Stainless Steel | Stainless Steel | Plastic | Spring Assisted | 0000000 | 00000 |
3/16" | 1/16" | __ | 8" | Steel | Steel | Plastic | Spring Assisted | 0000000 | 00000 |
1/4" | 13/64" | 9/64" | 8" | Steel | Steel | Plastic | Manual | 0000000 | 00000 |
Flush-Cut Compact Bolt Cutters with Offset Handles
Handle is angled 30° to keep work in sight and hands clear of the work surface. Blades are flat on one side for close-to-the-surface cuts. The small size and spring-loaded jaw let you make quick cuts with one hand. Jaws are riveted onto the handles and are not replaceable. Not for use on wire rope.
For Max. Soft Steel Dia. | Overall Lg. | Jaw Material | Handle Material | Grip Material | Opening Style | Each | |
1/8" | 8" | Steel | Steel | Plastic | Spring Assisted | 0000000 | 000000 |
Economy Nut Cutters
Split one side of the nut at a time with a nonreplaceable blade. Use a hand wrench to turn the adjustment screw. Blade swivels 360° to cut in any position. Nut width is measured across the flats.
For Max. Nut Wd. | Overall Lg. | Number of Blades | Blade Material | For Wrench Size | Each | |
For Use On Aluminum, Brass, Bronze, Nickel, Stainless Steel, Steel, Titanium | ||||||
---|---|---|---|---|---|---|
3/4" | 5 1/2" | 1 | Steel | 3/4" | 00000000 | 000000 |
Nut Cutters
Turn the adjustment screw with a wrench to force the cutting blade into one side of a nut. Blade swivels 360° to cut in any position. Nut width is measured across the flats.
For Max. Nut Wd. | Overall Lg. | Number of Blades | Blade Material | For Wrench Size | Each | |
For Use On Aluminum, Brass, Bronze, Stainless Steel, Steel | ||||||
---|---|---|---|---|---|---|
3/4" | 6 3/4" | 1 | Steel | 3/4" | 0000000 | 000000 |
Hydraulic-Powered Nut Cutters
Cut all grades of nuts up to Rockwell C44 with these powerful cutters. An angled head gets close to the nut for easy splitting. Nut width is measured across the flats. Hydraulic Hose with Fittings and Hydraulic Pump are required.
Cutters | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Nut Wd. | For Bolt Dia. | Replacement Blades | Pumps for Hydraulic Jacks | Hose for Hydraulic Jacks | |||||||||||
Min. | Max. | Min. | Max. | Overall Lg. | Blade Material | Cylinder Actuation Type | Pressure | Each | Each | Each | Each | ||||
For Use On Steel | |||||||||||||||
1/2" | 3/4" | 5/16" | 1/2" | 7 7/8" | Steel | Single Acting | 10,000 psi | 00000000 | 000000000 | 00000000 | 0000000 | 0000000 | 0000000 | 000000 | 0000000 |
3/4" | 15/16" | 1/2" | 5/8" | 8 15/16" | Steel | Single Acting | 10,000 psi | 00000000 | 00000000 | 00000000 | 000000 | 0000000 | 000000 | 000000 | 000000 |
15/16" | 1 1/8" | 5/8" | 7/8" | 10 1/4" | Steel | Single Acting | 10,000 psi | 00000000 | 00000000 | 00000000 | 000000 | 0000000 | 000000 | 000000 | 000000 |
1 1/8" | 1 9/16" | 7/8" | 1 1/8" | 11 1/4" | Steel | Single Acting | 10,000 psi | 00000000 | 00000000 | 00000000 | 000000 | 0000000 | 000000 | 000000 | 000000 |
Wire End Cutters
Also known as nippers, these cutters have wide, flat jaws that cut steel wire and bolts close to the surface. A spring opens the jaws for quick cutting.
For Max. Dia. | |||||||||
---|---|---|---|---|---|---|---|---|---|
Soft Steel | Medium-Hard Steel | Overall Lg. | Jaw Wd. | Jaw Material | Handle Material | Grip Material | Opening Style | Each | |
1/8" | 1/16" | 8" | 0.59" | Steel | Steel | Plastic | Spring Assisted | 0000000 | 000000 |
Hydraulic-Assist Multipurpose Bolt, Wire Rope, and Cable Cutters
Hydraulic-powered jaws cut bolts, wire rope, rods, and electrical cable with low effort and minimal material distortion. Blades can be sharpened and replaced.
Cutter rated for 20,000 volts has insulated handles.
Cutters | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Wire Rope Dia. | Replacement Cutting Blades | |||||||||||||
Steel | Stainless Steel | For Max. Soft Steel Dia. | For Max. Steel-Reinforced Aluminum Cable Dia. | For Max. Data Cable Dia. | For Max. Rebar Dia. | Overall Lg. | Jaw Material | Handle Material | Grip Material | For Max. Voltage | Each | Each | ||
5/8" | 5/8" | 5/8" | 5/8" | 5/8" | 1/2" | 15" | Steel | Steel | Rubber | Not Rated | 0000000 | 000000000 | 0000000 | 0000000 |
3/4" | 3/4" | 11/16" | 3/4" | 3/4" | 1/2" | 15" | Steel | Steel | Rubber | 20,000 V AC | 0000000 | 00000000 | 0000000 | 000000 |
1 1/8" | 1 1/8" | 1 1/4" | 2 1/8" | 2 1/8" | 3/4" | 24 1/2" | Steel | Steel | Rubber | Not Rated | 0000000 | 00000000 | 000000 | 00 |
1 1/4" | 1 1/4" | 1 1/4" | 1 1/4" | 1 1/4" | 7/8" | 27" | Steel | Steel | Rubber | Not Rated | 0000000 | 00000000 | 0000000 | 000000 |
Hammer-Driven Large-Diameter Wire Rope Cutters
With a quick hammer blow, these cutters make cuts without squeezing or flattening wire. For best results, use with Wire Rope Cutting Bands.
Cutters | ||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Wire Rope Dia. | Mounting Holes | Replacement Blades with Guide Pin | Replacement 2-Pc. Die Set | Replacement Guide Pin | Replacement Plunger with Guide Pin | |||||||||||||
Steel | Stainless Steel | Overall Ht. | Blade Material | Opening Style | Base Dia. | No. of | Dia. | Fasteners Included | Each | Each | Each | Each | Each | |||||
3/4" | 3/4" | 6" | Steel | Manual | 3 1/2" | __ | __ | __ | 00000000 | 0000000 | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 000000 |
1 1/16" | 1 1/16" | 7" | Steel | Manual | 6 1/4" | 3 | 9/16" | No | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 00000 |
1 1/2" | 1 1/2" | 9" | Steel | Manual | 7 3/4" | 3 | 5/8" | No | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 000000 | 00000000 | 0000 | 00000000 | 000000 |
Hydraulic-Assist Lever-Operated Large-Diameter Wire Rope Cutters
These manually operated cutters make a clean cut with just a few pumps of the handle. They don't require any outside power and are light enough to carry to the job.
Cutters | |||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Wire Rope Dia. | Overall | Base | Mounting Holes | Replacement Cutting Blades | Repair Kit | ||||||||||||
Steel | Stainless Steel | Lg. | Wd. | Ht. | Handle Material | Grip Material | Lg. | Wd. | No. of | Dia. | Fasteners Included | Each | Each | Each | |||
3/4" | 3/4" | 12" | 3 5/8" | 6" | Steel | Plastic | 12" | 3 5/8" | 4 | 3/8" | No | 00000000 | 000000000 | 00000000 | 0000000 | 00000000 | 0000000 |
1 1/8" | 1 1/8" | 14" | 4 1/8" | 7" | Steel | Plastic | 14" | 4 1/8" | 4 | 3/8" | No | 00000000 | 00000000 | 00000000 | 000000 | 00000000 | 000000 |
1 3/4" | 1 3/4" | 18 1/2" | 5" | 8" | Steel | Plastic | 18 1/2" | 5" | 4 | 3/8" | No | 00000000 | 00000000 | 00000000 | 000000 | 00000000 | 000000 |
Threaded Rod Cutters
Cut rods and bolts while leaving their threads intact.
Roller Chain Breakers
Drive out chain pins with a twist of the handle. Breakers allow you to disassemble chain in order to remove or add links.
For technical drawings and 3-D models, click on a part number.
Roller Chain Breakers | ||||||||
---|---|---|---|---|---|---|---|---|
Overall | Replacement Points | |||||||
For Roller Chain Trade Size | For Roller Chain Pitch | Lg. | Wd. | Material | Each | Each | ||
For Single- and Double-Strand ANSI Roller Chain | ||||||||
25, 35, 40, 41, 50, 60 | 1/4"-3/4" | 10 3/4" | 3 1/4" | Steel | 0000000 | 000000 | 0000000 | 00000 |
60, 80, 100 | 3/4"-1 1/4" | 14" | 4" | Steel | 0000000 | 00000 | 0000000 | 0000 |
120, 140, 160 | 1 1/2"-2" | 29 1/2" | 6 1/2" | Steel | 0000000 | 000000 | 0000000 | 0000 |
160, 180, 200, 240 | 2"-3" | 28" | 2 1/2" | Steel | 00000000 | 00000000 | 000000 | 00 |
Wrench-Drive Roller Chain Breakers
Tighten the hex head screw with a wrench to remove chain pins without damaging side plates. Breakers allow you to disassemble chain in order to remove or add links.
Roller Chain Breakers | |||||||||
---|---|---|---|---|---|---|---|---|---|
Overall | Replacement Points | ||||||||
For Roller Chain Trade Size | For Roller Chain Pitch | Lg. | Wd. | Material | Features | Each | Each | ||
For Single-Strand ANSI Roller Chain | |||||||||
35, 40, 41, 50 | 3/8"-5/8" | 4 1/2" | 3" | Steel | Clamping Sleeve | 0000000 | 000000 | 0000000 | 000000 |
50, 60, 80 | 5/8"-1" | 6 1/2" | 4 1/4" | Steel | Clamping Sleeve | 0000000 | 00000 | 0000000 | 00000 |
Roller Chain Breaker/Riveters
In addition to breaking chain, this tool can also rivet chain to increase strength for better performance on high-speed drives. It can break ANSI numbers 50 and 60 roller chain and rivet ANSI number 50 chain. Attach the removable handle and clamp the breaker/riveter in a vise or bolt it to a workbench.
Roller Chain Breaker/Riveter | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Mounting Hole | Replacement Point | ||||||||||
For Roller Chain Trade Size | For Roller Chain Pitch | Lg. | Wd. | Material | Mounting Fasteners Included | Number of | Thread Size | Includes | Each | Each | ||
For Single-Strand ANSI Roller Chain | ||||||||||||
50, 60 | 5/8"-3/4" | 6" | 1 3/4" | Steel | No | 2 | 3/8"-24 | Press Plate, Removable Handle, Rivet Anvil, Steel Rivet Set | 0000000 | 0000000 | 0000000 | 000000 |