We will reply to your message within an hour.
The arm length adjusts from 3 to 6 feet making these exhaust hoses good for locations with low ceilings.
For exact positioning, these hoses swivel 360°.
Move the hose into position and the support arm will hold it in place.
Remove fumes, vapors, and fine dust particles from your space.
Mount these exhausters to the floor to remove fumes, vapors, and fine dust particles from your space.
In addition to using the handle to carry these exhausters, you can mount them to a wall, bench, or floor.
Position these exhausters above drums, tanks, and distillers.
This fume exhauster has a motor that is UL listed for Class I, Divisions 1 and 2, Groups C and D; and Class II, Divisions 1 and 2, Groups E, F, and G locations. Use it to remove fumes, vapors, and fine dust particles from your space.
Increase airflow through exhaust duct to improve furnace performance.
Often used for electric-to-gas conversions and renovations, these exhausters allow gas- or oil-fired equipment to be vented through a sidewall rather than a chimney.
Mount these cleaners to workbench tops to remove odors and fumes from the air.
Eliminate static buildup while cleaning air.
Mount these air cleaners to your bench top and adjust the arm to your desired position.
Filtering away dust and particles, these hoods create a clean space for demanding work, such as bioprocessing, pharmaceuticals, electronics, and optics.
Carry these small cleaners to job sites to remove odors and dust from the air.
Carry these cleaners to job sites to remove odors and fumes from the air. Use the hose to direct cleaning.
Roll this air cleaner to the contaminant source or place it on a bench top.
Larger than portable air cleaners, these air cleaners roll to where you need them.
Often used in machine shops, these cleaners remove oil and coolant mist from the air.
Purify the air in spaces with light cleaning needs.
Save floor space—cleaners mount in a T-bar style ceiling.
Remove viruses, bacteria, dust, and other particles from the air.
A thick-gauge metal frame makes these filters more durable than other reusable filters.
These washable, durable filters are made to your dimensions.
Also known as metal mesh filters. These filters can be washed and reused.
These filters are built to withstand higher temperatures than other metal panel air filters.
Magnetic strips on the back of the frame make these filters easy to install and remove.
An inherent electrostatic charge attracts dust and particles to these filters.
The pleats create a large surface area for filtering without reducing airflow.
Select the dimensions you need for custom-sized frames.
A compound inhibits mildew and mold growth.
These filters are typically used as replacements in HVAC equipment.
The filter material extends beyond the frame for a tight fit, creating a seal to prevent air from bypassing the filter around its edges.
A compound inhibits mildew, mold, and fungi growth.
Create a custom-sized filter or protective layer for expensive filters.
Rated MERV 13, these filters capture particles down to 0.3 microns.
Rated MERV 11, these filters capture particles down to 1 micron.
With tight pleats, these filters have a larger surface area than filters with standard pleats for improved efficiency and an even longer life. These filters strike a good balance of filtering efficiently while allowing airflow, making them a more cost-effective option than higher rated filters.
Hold panel filters in place.
Eliminate heavy odors with these filters that have 30 times the odor removing ability of standard odor-removal air filters.
Carbon granules in these filters remove odors. They are pleated to maximize filtering surface area without reducing airflow.
Clear the air of fine particles and odors caused by high levels of pollution, such as wildfire smoke.
Use in exhaust hoods to remove grease and oil from the air.
Cut these washable, reusable rolls to the size you need.
Wash and reuse these pads. Cut to the size you need.
Determine the right pores per inch for your air filtering application—you'll receive several small samples with different pores per inch.
Wrapped in aluminum mesh for added support, these filters can be used without a frame.
Cut these rolls to the size you need.
Cut these pads to the size you need.
These rolls are an economical choice for protecting more expensive filters that catch finer particles.
These pads are an economical choice for protecting more expensive filters that catch finer particles.
Designed for use with electronic equipment, these pads can withstand prolonged exposure to heat and humidity.
With a higher carbon concentration than odor-removal air filter rolls, these pads handle heavier odors.
Carbon granules inside these filters remove odors from the air. Cut them to the size you need.
Replace the filter roll in your automatic filtering equipment.
Add support to filter rolls and pads that have been cut to size.
The rigid frame on these filters withstands fluctuations in airflow, such as those created by variable air volume systems.
Multiple panels maximize filtering surface area for long service life.
Control dust and contaminants in hospitals, laboratories, and other demanding environments. These filters capture particles down to 0.3 microns.
The deep pockets on these filters maximize filtering surface area with minimal airflow resistance.
Prevent air from bypassing your filter. These filters are self-sealing thanks to the filter material that fully encloses the metal frame.
Use these filters to extend the service life of air-powered tools and then throw them away when you're done.
Use these filters where high water and dirt removal is needed—they have a two-layer filter element made of stainless steel wire mesh and cotton/polyester packing.
Protect small air-powered tools, such as impact wrenches, ratchet wrenches, grinders, and screwdrivers.
Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.
Assembled, inspected, and packaged in a clean environment, these filters come sealed in anti-static double bags.
An automatic drain discharges up to 300 gallons per hour to handle compressed air with high moisture content.
Get two stages of filtration—the first stage removes most particles and water droplets; the second captures any remaining particles and water droplets down to 5 microns.
A polyurethane bowl provides good chemical resistance for use with synthetic compressor oils and cleaning fluids.
The housing and bowl are 316 stainless steel to handle extremely corrosive environments such as those in semiconductor, marine, chemical, and paper industries.
Mount these filters to a 35 mm DIN rail with the included brackets.
Replace the filter element in your Wilkerson modular compressed air filter to trap solid particles and water droplets as small as 5 microns.
Replace the filter element in your Norgren modular compressed air filter to trap solid particles and water droplets as small as 5 microns.
Replace the filter element in your Parker modular compressed air filter to trap solid particles and water droplets.
Replace the filter element in your Festo modular compressed air filter to trap solid particles and water droplets as small as 5 microns.
Replace the filter element in your ARO modular compressed air filter to trap solid particles and water droplets.
Replace the filter element in your SMC modular compressed air filter to trap solid particles and water droplets as small as 5 microns.
Replace the filter element in your ASCO Numatics modular compressed air filter to trap solid particles and water droplets as small as 5 microns.
Also known as coalescing filters, these filter elements fit in ASCO Numatics modular compressed air filters to remove oil and particles as small as 0.01 microns.
Also known as coalescing filters, these filter elements fit in ARO modular compressed air filters to remove oil and particles as small as 0.3 microns.
Also known as coalescing filters, these filter elements fit in SMC modular compressed air filters to remove oil and particles as small as 0.01 microns.
Also known as coalescing filters, these filter elements fit in Parker modular compressed air filters to remove oil and particles as small as 0.01 microns.
Also known as coalescing filters, these filter elements fit in Wilkerson modular compressed air filters to remove oil and fine particles.
Also known as coalescing filters, these filter elements fit in Festo modular compressed air filters to remove oil and particles as small as 0.01 microns.
Also known as coalescing filters, these filter elements fit in Norgren modular compressed air filters to remove oil and particles as small as 0.01 microns.
These filter elements fit in ASCO Numatics modular two-stage compressed air filters to remove water droplets, oil, and particles as small as 0.01 microns.
Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.
Designed for use in main lines with high contamination, these filters remove oil to extend the service life of air-powered tools and equipment.
Housing and bowl are 316 stainless steel to handle extremely corrosive environments and meet NACE (National Association of Corrosion Engineers) specifications.
Use these filters to extend the service life of air-powered tools and equipment and then throw them away when you're done.
A polyurethane bowl offers good chemical resistance for use with synthetic compressor oils and aggressive cleaning agents.
Eliminate small traces of oil vapor and its associated odor with these filters and then throw them away when you're done.
Use these filters in applications where high-quality air is critical. They remove particles down to 0.003 microns, eliminating small traces of oil vapor and its associated odor.
Replace a damaged bowl, or change the bowl material or drain type on your Wilkerson modular compressed air filter.
Replace a damaged bowl, or change the drain type on your Festo modular compressed air filter.
Replace a damaged bowl, or change the bowl material or drain type on your Norgren modular compressed air filter.
Replace a damaged bowl, or change the bowl material or drain type on your Parker modular compressed air filter.
Replace a damaged bowl, or change the bowl material or drain type on your ARO modular compressed air filter.
Replace a damaged bowl, or change the bowl material or drain type on your SMC modular compressed air filter.
Replace a damaged bowl, or change the bowl material on your ASCO Numatics modular compressed air filter.
Housing and bowl are 304 stainless steel for good corrosion resistance in damp environments.
Generate clean air for instrumentation and applications with critical air requirements.
Often used in medical device manufacturing and food-processing facilities, these filters have a stainless steel element that can be sterilized in an autoclave.
Remove bacteria, viruses, moisture, and other particles from compressed air and gases used in food, pharmaceutical, biotech, and electronics applications.
Two-stage filtration is like getting two filters in one—the first stage removes large particles, while the second removes fine particles.
No need to buy and service two filters—these filters have a single element that removes both large and fine particles.
Replace failing or lost O-rings in Wilkerson modular compressed air filters.
Replace failing or lost O-rings in ASCO Numatics modular compressed air filters.
Replace failing or lost O-rings in SMC modular compressed air filters.
Replace failing or lost O-rings in Festo modular compressed air filters.
Replace failing or lost O-rings and gaskets in Norgren modular compressed air filters.
Run up to four air-powered tools from a single air supply.
Use a single air supply to meet the pressure requirements of multiple applications—connect one of these manifolds to your air line, and then set a different output pressure for each station.
Connect two or more of these manifold regulators to meet multiple pressure requirements from a single air supply—set a different output pressure with each regulator.
A 316 stainless steel housing provides superior corrosion resistance and meets NACE (National Association of Corrosion Engineers) material requirement MR-01-75.
Mount these regulators to a 35 mm DIN rail or a wall with one of the two included brackets.
A pressure-calibrated dial allows for easy adjustments to outlet pressure in high-flow applications.
At ±0.1% accuracy, use these regulators in sensitive applications where constant, consistent pressure is important.
Fit these regulators in tight spaces to adjust and maintain air pressure in sensitive applications where constant, consistent pressure is important.
With a greater flow capacity than our standard precision compressed air regulators, use these regulators to adjust and maintain air pressure in sensitive high-flow applications where constant, consistent pressure is important.
Mount these regulators to a 35 mm DIN rail with the included bracket.
Keep an eye on the output pressure in high-flow applications—these regulators have a display so you can monitor your application locally.
View and control output pressure remotely and at the source.
Designed for control applications that require high reliability and repeatability, these regulators translate electrical signals to output pressure.
Adjust and maintain the pressure of your compressed air.
A lower profile than our other compressed air regulators makes these regulators a better fit in tight spots.
Use these regulators to adjust and maintain the pressure of your tubing air lines.
Cleaned and double bagged in an ISO Class 3 and Fed. Spec. Class 1 clean room for protection from contamination, these regulators are suitable for use in clean rooms.
A 316 stainless steel housing allows these regulators to withstand corrosive environments in the semiconductor, marine, chemical, instrumentation, and paper industries.
An internal check valve permits reverse flow, so these regulators work with double-acting cylinders.
No need to worry about unintentional changes to your pressure setting—these regulators maintain a fixed outlet pressure.
Mount these regulators to a 35 mm DIN rail with the included brackets.
Designed for installation directly to your air-powered tool, these regulators maintain the set air pressure.
Prevent unauthorized adjustment and unintentional pressure changes with these regulators.
Use these dryer/filters to protect air-powered tools from water, oil, oil vapor, and particles, then throw them away when you're done.
Each of these filter/dryers has two desiccant towers—one that absorbs moisture, particles, and oil in the air while the other reactivates saturated desiccant so you have an uninterrupted supply of clean, dry compressed air.
With a clear polycarbonate bowl that’s visible from all angles and silica gel desiccant that changes from blue to pink, it’s easy to see when it’s time to change the cartridge on these dryer/filters and dryer/filter/regulators.
These dryer/filters have a clay desiccant that removes moisture, oil, and particles, so there’s no need to install a separate filter and dryer. Once aftercoolers and separators have removed the bulk of the water, they remove any remaining moisture in your air line.
Install these dryers just before air-powered tools as final protection from water and particles and throw them away when you’re done.
For use with Norgren modular compressed air systems, once aftercoolers and separators have removed the bulk of the water, use one of these desiccant-filled dryers to remove any remaining moisture in your air line.
Once aftercoolers and separators have removed the bulk of the water, use these dryers to remove any remaining moisture in your air line.
Get dry compressed air in high-pressure systems—these dryers have a maximum pressure rating of 300 psi. Once aftercoolers and separators have removed the bulk of the water, they remove any remaining moisture in your air line.
These all-in-one dryer/filters eliminate the need for individual dryers, separators, and filters. They cool air through refrigeration to condense water vapor for removal.
Cool air through refrigeration to condense water vapor.
An SMC filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.
An ARO filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.
A filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.
A Wilkerson filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.
A Norgren filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.
A Parker filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.
A Festo filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.
An ASCO Numatics filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.
No need for thread adapters—these filter/regulator/lubricators have an NPT inlet and a BSPP outlet.
A filter, regulator, and lubricator with push-to-connect fittings are combined to provide clean, lubricated compressed air at your required pressure. Fittings make a tight seal around tubing.
With one outlet port before the lubricator and one after, these filter/regulator/lubricators work in systems that require lubrication in some lines but not in others.
A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.
These filter/regulator combinations come as one convenient unit that cleans the air as it regulates pressure.
A clear polyurethane bowl makes these filter/regulators chemical resistant for use with synthetic compressor oils and cleaning fluids and allows you to see inside to monitor contents.
With ±0.2 psi accuracy, these filter/regulators provide more precise control than our other compressed air filter/regulators.
No need for thread adapters—these filter/regulators have an NPT inlet and a BSPP outlet.
Mount these filter/regulators to a 35 mm DIN rail with the included brackets.
Assembled, inspected, and packaged in a clean environment, these filter/regulators come sealed in antistatic double bags.
A stainless steel housing and bowl allow these filter/regulators to withstand corrosive environments in the semiconductor, marine, chemical, instrumentation, and paper industries.
Use a single air supply to distribute air to up to four locations. In addition to the outlet for inline connection, these manifolds have three 1/4 NPT female outlets for connection to air-powered tools and equipment.
An oil filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.
Connect Festo modular filter/regulator/lubricator components with the same series number.
Connect ASCO Numatics modular filter/regulator/lubricator components with the same series number.
Connect Norgren modular filter/regulator/lubricator components with the same series number.
Connect Parker modular filter/regulator/lubricator components with the same series number.
Connect ARO modular filter/regulator/lubricator components with the same series number.
Prevent accidental start-up when servicing equipment.
Swap out Festo modular filter/regulator/lubricator components without unthreading your air line connections.
Swap out Norgren modular filter/regulator/lubricator components without unthreading your air line connections.
Swap out ARO modular filter/regulator/lubricator components without unthreading your air line connections.
Filter and lubricator in one, these filter/lubricators provide clean, lubricated compressed air to extend the service life of tools and equipment.
Also known as Monday-morning valves, these valves slowly introduce pressure to reduce surge damage during start-up.
These separators have higher flow rates compared to our other compressed air separators. Prevent equipment damage and wear caused by moisture in your compressed air supply. The first step in water removal, use one of these separators to remove the large amount of water created as compressed air cools.
In addition to removing large amounts of water, these separators also remove particles and oil droplets. Place them after your compressor and aftercooler, or at the point of use in applications that don't require an aftercooler.
A float-operated drain valve on these separators automatically opens when the bowl begins to fill. The first step in water removal, use one of these separators to remove the large amount of water as compressed air cools.
When water is condensed out of a compressed air system, it contains oil from the compressor that makes disposal difficult. These separators use two-stage filtration to reduce oil content to below 20 parts per million.
Get clean, dry air wherever you need it. The separator, filter, and dryer mounted on these tanks clean and dry compressed air as you fill it. Once full, move the tank to your workspace on its pneumatic wheels.
Use these components to put together a duct system to collect sawdust, chips, shavings, and granular material from woodworking operations.
Mount these powerful units on a drum for two-stage collection. In the first stage, larger particles fall into the drum; in the second stage, smaller particles go into the filter bag, resulting in less wear on the blower and filter bag. These collectors are 99% efficient for particles 10 microns and larger.
The cartridges in these collectors are 98% efficient for particles 1 micron and larger—great for picking up fine dust such as graphite and talc.
Collect wood dust with these simple yet effective dust collectors. The base has wheels, so you can move the unit around for connection to different equipment. These collectors are 95% efficient for wood dust particles 25 microns and larger.
Move large quantities of air and dust through longer runs of pipe than the drum-mount dust collectors. This powerful unit separates most waste material in the airflow and deposits it into a dust storage barrel. These collectors are 99% efficient for particles 5 microns and larger.
Extract the dust from your blasting cabinet to increase effectiveness and improve visibility.
Separate dust from your abrasive media as it's collected so you can reuse the media.
Mount on pedestal grinders for easy dust collection
Connect these dust hoods to your vacuum system to contain and remove dust and fine particles while grinding or cutting.
Draw particles and filament fumes away from open-frame 3D printers without cooling off printed parts.
Pair these hoods with an exhaust system to contain harmful fumes, vapors, and gasses while venting them away from work spaces—they protect users from inhaling or coming in contact with them.
Produce a stream of air down a doorway or other opening to keep out dust, dirt, insects, and fumes while allowing personnel to pass through.